Polycell Damp Seal Aerosol 500ml

Product Information

Rising damp is more than just a touch of mildew or mould, it’s indicative of an underlying condition that will reoccur unless moisture is prevented from rising and entering the walls.

It does however work in creating a barrier where it can work to eliminate damp and mould from penetrating your home interior which is often a concern for home owners in the UK. If you’re home is suffering from damp entering the walls, ceiling and window frames then damp seal paint can be a good solution to stop it from affecting surfaces. Cooking, showering, bathing and drying washing indoors are just some of the everyday activities that increase the moisture in the air causing more condensation to form. Effective insulation will certainly help here while air conditioning will also purify the air and a good dehumidifier will remove moisture from the air, both in the bathroom and throughout the rest of the house. Aim for humidity levels of no more than 50%. 3. Remove excess moisture

How to Reduce Mould in the Bathroom

As with most things, prevention is better than cure, so trying to avoid mould occurring will always be preferable to attempting to eradicate it once you’ve got it.

Dehumidifiers vastly improve damp and condensation problems in a home because they reduce moisture levels. They’re most useful in rooms where there’s a lot of humidity. For example, a kitchen or bathroom. A room where clothes are dried. Or in a bedroom where condensation builds up from the heat caused by breathing. Installing loft and cavity wall insulation and draught-proofing windows and exterior doors can help keep your home warmer and means reduced energy bills too. Moisture in the bathroom is a bigger problem when it condenses as water on cold surfaces, which can be alleviated by keeping the room well heated.Closed curtains are great draught excluders, but they also prevent the windowpane from being warmed up by central heating. This makes the glass colder than it could be, therefore causing condensation. Keeping curtains open at night means the glass temperature will stay closer to the room temperature so condensation won’t form. If it’s not practical to keep curtains open, changing them to thinner curtains will still make a difference. The short answer is yes, says Aktas, but it’s complicated. “If you do mould testing anywhere, you will find some mould, but at what level it becomes a problem is something that is not well established yet and therefore hasn’t transpired into policies or practices.” This point is echoed in a new article in the journal Nature by a number of scientists including the UK’s chief medical officer Chris Whitty. Aktas and her team at UCL are working to benchmark these levels, “so that we can give some guidance to the water remediation industry as to when they should be alerted and should be intervening.” Sometimes you will see crumbling paint or wallpaper hanging or bubbling this effect on walls and ceilings can be a sign that there is a damp problem in your home. When cleaning affected walls, open windows and avoid inhaling mould-removal products. Photograph: imageBROKER/Alamy How do you clean mould?

Heating and insulationThe frequent rises and drops in temperature caused by central heating being switched on and off contribute to condensation forming. This is further exacerbated in a home with poor insulation because the temperature difference is more dramatic. Also, the colder a surface is, the more likely it is that condensation will form on it. Improving insulation adds overall warmth to a home and prevents extreme temperature changes. It also helps to keep surfaces warmer. So, cavity wall insulation, for example, stops cold spots on walls. And loft insulation prevents the ceiling from being cold. Mould can be a big problem in bathrooms and other areas that have a damp atmosphere. Mould is a type of fungus that thrives in a warm environment where the relative humidity is 70% or higher. Signs of damp in a home are damp patches on walls, flaking plaster, peeling wallpaper and mould growth. You may also notice a distinct, musty, damp smell. Here’s our advice to remove this odour.Unwanted Food or Drink Products - Once supply conditions are broken, there are a number of factors outside of our control that can affect the quality of a product. Therefore perishable goods such as food and drink cannot be returned. Your best solution is to choose one of the best damp seal paints and treat the area properly, after first fixing whatever is causing the damp in the first place! While boosting insulation will reduce the amount of cold surfaces for water vapour to condense on, and help keep your home warmer, it can also decrease airflow and trap water in the home. David Prince, a damp specialist at Abbott Property Care, recently encountered a bungalow that didn’t have a damp problem until a government grant enabled the owners to install extra loft insulation. Soon after its installation, water started dripping from the ceiling. The new layer, he says, “stopped the breathability of the building and condensation was occurring between the new insulation laid on top of old insulation.” The motto when retrofitting energy-saving measures, says Aktas, is “no insulation without ventilation. Air tightness is important when trying to improve the energy efficiency of our homes – we don’t want the air exchange between indoors and outdoors to be very high because then you have to heat fresh air constantly.” How can I ventilate without letting the cold in? Don’t leave wet sponges and cloths in the shower or bath since they will add to the level of moisture in the atmosphere.