Benro Mach3 Tripod S3 Carb 4 Sect Long

Product Information

Aluminum Legs: The Mach3 TMA37AL features aluminum leg construction making it both lightweight and sturdy. The Mach 3 extends to a height of 153cm with the column down, which is absolutely perfect for my needs. Minimum Height (cm): 41 Maximum Height (cm): 179 Base Mount Diameter (mm): 68 Closed Length (cm): 68 Converts to Monopod: N Foot Mount: 3/8 Foot Size (mm): 34 Foot Type: Rubber Head Mount: 3/8"-16 Leg Diameter 1 (mm): 32. If I had a choice of tripods to grab, (which I do) I would grab the Benro every time, despite the extra weight over my others. The Mach3 family of tripods utilize high performance, rubber twist locks for improved ergonomics and resistance to the elements.

I added a spreader chain chain so it wouldn't splay out too far, and there was some noodling around with the mounting bolt. Spiked Feet: A set of Spiked Feet are included with the Mach3 TMA38CL tripod for increase stability when shooting outdoors. A hook on the bottom of the center column allows for the addition of stabilizing weight, and the included carrying case protects the tripod during transport. Maximum Payload Capacity (kg): 16 Quick Release Type: N/A Slim Frame: Yes-with 3 stops Product Height (cm): 85 Product Length (cm): 16. If you use it on softer ground you have the choice of changing the grippy screw on rubber feet with the spikes that come with it.Monopod Conversion: It is extremely simple to convert one of the Mach3 TMA28A's legs into a monopod adding even more versatility.

High-performance twist locks and magnesium castings make this 9X carbon fibre tripod ideal for indoor or outdoor photo shoots. Being a landscape photographer based in Dorset, I have subjected the Mach 3 to all sorts of weather conditions. Magnesium Casting: Wherever possible the Mach3 TMA27A employs magnesium castings making it among some of the lightest tripods on the market.There’s one of those pull out hook thingies at the bottom of the centre column for hanging bags on to help stabilize it even more. I'm using it with a Skywatcher 127mm Mak and the AZ-GTi mount which altogether weighs about 14lbs with 2" eyepieces. The center column can be replaced with the included short column to allow the tripod to reach a minimum height of 12.

Clifton Cameras is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN728300).Magnesium Casting: Wherever possible the Mach3 TMA47AXL employs magnesium castings making it among some of the lightest tripods on the market. It's stiffness and strength make it suitable for most professional applications where heavy loads need supporting, but the carbon fibre and magnesium construction still makes it easily portable. the Mach3 tripod seemed - on paper - to be a great complement to my 120mm refractor (~14lbs) mounted on a Stellarvue M2C mount (~4lbs with 26lbs load capacity). Wherever possible Mach3 tripods employ magnesium castings, making them among some of the lightest tripods currently available.

However, in using the Mach3 with that refractor and mount, there is an unacceptable amount of dampening. As part of our most advanced range of photo tripods, the Mach3 TMA47AXL combines classic design with advanced materials.Equipped with interchangeable screw-in rubber feet and stainless steel spiked feet for increased stability. It will all depend on the length of the sections whether it would be better for sitting in a hide, etc, or standing only, whether to have 3 or 4 sections. Converts to Monopod: Y Foot Mount: 3/8 Foot Size (mm): 29 Foot Type: Rubber Head Mount: 3/8"-16 Leg Diameter 1 (mm): 28. Maximum Height w/Column Retracted (cm): 135 Maximum Payload Capacity (kg): 14 Minimum Height (cm): 31 Series: Mach 3 Bubble Level: YES Converts to Monopod: YES Foot Mount: 3/8 Foot Size (mm): φ29. I’ve had the old reliable Manfrotto 055 XProB, which served me well on moors and coast and is now residing in the loft with quite badly corroded leg clamps.