Bosch Home and Garden Bench Drill PBD 40 (710 W, Maximum Drilling Diameter In Steel/Wood: 13 mm/40 mm, Drilling Stroke 90 mm, In Carton Packaging)

Product Information

The Bosch bench drill delivers precise and comfortable drilling in many different kinds of materials making it ideal for furniture and model building as well as renovation work. To exercise your right to cancel you must inform us (Details here) of your decision to cancel the contract by a clear statement (eg a letter sent by post, fax or e-mail. Likewise, the plastic locking ring on the chuck is very well protected and will most likely last the life of the drill press because of that.

The clamp is a little fiddly to use, but as it’s attached directly to the shaft, it’s sturdy, and there’s no fear that you’ll put it down and. It looks quite small in the pictures but i have a compound slide table with a tilting vice fitted and i can still fit a forstner bit and drill through 100mm pieces of wood. Scheppach and Parkside has launched “competing” products) - I’d get the Bosch still, but wished they had parted with the wheel.I have not used a Bosch 'Green' in living memory, since learning very early on in a previous 'professional' life (Satellite installation - reinforced concrete, etc. Unfortunately the performance of these machines tends to rise directly in conjunction with their size and weight so it may be a bit of a compromise, although good quality sharp drill bits will help of course. As far as accuracy is concerned, it seems fine for my purposes such as using forstner bits to mount hinges on cabinet doors. Chuck play:The chuck does have a bit of play, meaning it can move very slightly sideways if I push it. one third of a millimeter) from pushing left to pushing right, measured at the end of an 8cm long bit.

When I had a business I purchased a heavy-weight, geared (not belt) drive unit for that kind of work. The PTA 1000 workbench provides flexibility on the job, especially for projects with large workpieces.Very actuate for drilling the same depth hole time and time again and great for countersinking multiple holes to the correct depth. There is little side to side movement in the drill shaft, and the movement in chuck spindle is horrendous. One thing I would point out is I have to tighten the pillar lock as hard as I can to prevent any wobble.