Paving Compound Paving Mortar Easy Joint Mushroom 12.5 Kilo Paving Grout

Product Information

We recommend that sensitive paving, such as Granite, Black Limestone and smooth Sandstone are sealed to protect from staining before using EASY Joint. Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3. Our sealers can protect against most common spills and are resistant to tea and coffee, red wine and engine oil, mayonnaise, vinegar, and ketchup etc. EASY Joint will always go rock hard as soon as it is in contact with the air, it does not need water to cure. They mention that it has a variety of colors to choose from and that the mushroom color blended in well with their York Stone once dried.

Solvents or solvent-containing colour enhencers (except the Romex – Colour Enhancer) should also not be used on the pavement fixing mortar because these can dissolve the mortar. Particularly sensitive, porous stone should always be sealed on both sides and all edges as a precaution. If using the wet method, ensure that the bedding mix is permeable and made up from a mix no stronger of 6 parts sharp sand to one cement.

The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. Full instructions on how to joint paving and a demonstration video showing how to joint a patio can be found on this web site.

He'd agree to clean the soil to a depth of 500 mm as i wantred gardens and lawns done by myself in the next two years , and do the patio properly as requested . Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.

The joints can be cleaned by the cautious use of a pressure washer, keeping a fan type nozzle, at an angle, no closer than 150mm from the surface.

It assists the paving grout to compact into the joints so there is no need to 'strike' or 'tool' the joints unless you want a smooth finish.EASY Joint goes hard on contact with air, our EASY Joint needs to sufficiently dry out to allow it to cure properly. It is positively dangerous now and I have since discovered that the "hardcore" he used was the original patio.

Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7. The sods only used 100 mm of all in one mixed ballast crap to make the base when I 'd asked for 300 mm of rammed 20 to 40 mm unwashed black limestone and 100 mm of 10 mm crushed white limestone watered in and plated solid , with the patio slabs being set on a 40 mm lime based mortar mix . No Waste: Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2" (50mm) or more of water.As the name implies, EASYJoint is easy to use – simply soak the paving with water before commencing and then simultaneously sweep and wash the jointing compound into the joints, letting the water take the strain. When pointing a porous surface, such as Sandstone and Limestone, it is recommended to use plenty of water as this helps prevent temporary staining from the compound.