AMZCNC Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2",3/4" and 1" Jaw Copper Pipe Propress Crimper Pressing Pliers

Product Information

We are on a mission to create a completely cordless jobsite with our complementary M12™ and M18™ systems. The first process before installation of new units was to alter the services to suit the new layout.

The Miracle copper crimping tool and copper crimping fitting have been subjected to extensive testing to ensure their reliability, including high and low-pressure shock tests, high and low-temperature tests, vibration tests, burst tests, and salt spray tests, etc. This was even worse when one thought the fitting was tight enough to hold itself in position so one tries to solder without supporting the pipework.Identify the right copper pipe size: Using a measuring tape and marker, measure and mark the correct length of copper pipe needed for the project. On one installation the gas fitter came to install the hob and he had the same issue, but his solution was to squash his fitting out of shape with a pair of water pump pliers to stop it rotating. Using a copper crimping tool to press copper pipe doesn’t require a heating permit to deal with fire. I didn't care to spend a lot of money especially considering what little it was going to be used but definitely on the first use the tool more then paid for itself.

The using process is the same as non-professional so that anyone can create copper pipe fittings connection anytime, anywhere with a copper crimping tool.Miracle FRK copper crimping tool is very flexible and adaptable for your refrigeration repairing and installing job. Would you like to try Miracle copper crimping tool and help us to improve and contribute to the market?

Clean the pipe with a wire brush or sandpaper to remove any leftover fitting material before installing a new fitting. If you use Miracle pipe press tool and pipe press fittings, the leakage rate is 88ppm, but when you use a soldering process, the leakage rate is 400ppm. Prepare the crimping tool: Select the correct size of crimping jaws for the crimping tool based on the size of the pipe and fitting. Ltd also manufacturer copper T fittings, and our copper crimping tool also can crimp copper T fittings.All of them are entirely optimized for having a successful, permanent, and safe air-conditioning repair or installation operation. Miracle copper crimping tool is the ultimate solution to crimp your copper pipe press fittings and complete connection within few seconds. The tool works as described, manual could be better as a few things were not written correctly in it but some tinkering around i figured it out pretty quickly. I bought the device and wanted to use it to press 28mm copper press fittings V-profile, from the brand that gives the pressing contour the V, but the connection was not pressed properly because the press jaws have an unsuitable shape.