vuba EASIHOLD ROCKS - 5L XL Gravel Binder for Bonding Stones, Bark and Gravel on Borders, Patios and Garden Paths. Lasts up to 3 Years, Non Toxic, Ready to Use.

Product Information

Easihold coats stones and rocks in a protective coating which inhibits the growth of moss and algae, whilst bonding them together to form a semi-solid surface. Our binder is usually not affected if there is rain after installation which is uncommon with pour-on resin binders.

To ensure that each aggregate particle is completely coated in resin, the two elements are combined in a force-action mix process to form a cold-pour mixture. per coat and 1x5 litre Jerry can cover 12-14m² using Spray On Method per coat when applying by the Pour On or Spray On method for the strongest finish. On this project, there’s a small area of loose gravel outside the kitchen door of a semi-rural property.Wet Pour Surfacing Wet pour surfaces are an impact-absorbing, rubber crumb floor covering which is traditionally used in playgrounds, parks and other recreational areas. Switch on the applicator hold it about 1-3 inches above your glued area and gently shake it to cover it with static grass.

Easihold is a revolutionary stabiliser for loose stones and small rocks in the home, garden and landscape. However, it’s not as durable as resin bound paving: the bonded aggregate particles may loosen over time, due to car tyres turning on the surface and it is not as easy to clean. Used on gravel sized from 1mm to 20mm GravelHold can be applied to areas that do not have heavy foot traffic, helping to provide a stunning feature to any project, without the worry of dislodging or moving any of the gravel. This award is testament to our dedication in sourcing the best resin for bonding gravel driveway, and the highest quality aggregates that have been thoroughly prepared to be ready for use. This could be done using a shovel or a squeegee, whatever is available, but the principle remains the same: the aggregate is spread and levelled-out to give a regular, even and smooth-ish surface.Resin bound surfacing is recommended for areas that take heavy loads such as driveways and pathways or garden furniture areas. Although this product uses the latest UV inhibitors, being an epoxy base there is still a chance that you will notice some colour change on white or light colour stones.

GravelHold is a next generation manufactured, UV-resistant resin which transforms loose and crunchy stones into a clean and neat landscape surface. Downloads If you’re looking for installation guides, technical information or material properties, you can find a number of documents to download here. These are likely to receive regular foot traffic the hand mix and trowel method will achieve the best results.When rainwater falls on a paved surface it needs to drain away or the water flows across the surface forming pools, adding to the flood risk and cracking. GravelHold has been designed for stronger bonding with a higher tolerance to contaminants whilst carrying the ability to be applied at lower temperatures and drying quicker than water-based binders. A range of natural resin bonded stone design choices are available for this type of flooring so you can create a customised loose stone look for your project.

Please note that GravelHold is an air-drying product and should only be left open when intended for application. Resin Bound Training Course A comprehensive one-day program to equip participants with the knowledge and practical skills required to install resin bound surfaces effectively. But no more loose gravel, no more stones being walked-in to the kitchen, no errant stones being perilously flicked up by the mower…. Portable Conveyor These beasts move over 320 tonnes per day and can be connected in series to transport building waste or materials around sites.Spraying is more efficient because the Easihold will go further, but this method requires an airless sprayer. To use the two innovative products together, simply install X-Grid before filling with gravel and applying GravelHold pour on resin on top to create a solid and attractive surface which will carry the benefits of both X-Grid and pour on resin. This is an easy task taking just a few minutes on a small area such as this, and the rejected, dirty, contaminated gravel is barrowed away. My plan is to gravel both the rear and side of my bungalow, but I do not want the gravel to be loose underfoot.