OWATROL Polytrol Colour-Renovator Cleaner (0.5 L)

Product Information

Martin Lewis: What the Autumn Statement means for you – including wages, benefits, pensions, ISAs, housing, national insurance and more Owatrol Polytrol is part of our extensive range of Owatrol Marine products that can be used to restore surfaces such as GRP, faded plastic, powder coated surfaces, and other surfaces used in marine applications. We are sure you will have something in need of revival, but if you need a little inspiration, take a look at these 5 uses for Polytrol; 1) Revival of a narrowboat’s gelcoat So there you have it! As you can see, Polytrol can be used on a wide variety of surfaces for a whole range of projects. Are you feeling inspired? Try Polytrol today! Both employees and self-employed workers will pay less in National Insurance from next year, Chancellor Jeremy Hunt has announced in today's Autumn Statement.

Owatrol polytrol is easy to administer using a soft brush, cloth or fine wire wood for metal and can be wiped off in 10 minutes. Owatrol polytrol has a coverage of 18m2/litre and a drying time of 10-20 minutes (leave for 24 hours before use) However someone just let us try an Owatrol product called Polytrol on a small area, and the improvement seemed considerable, (though I have yet to return to see it a few days later). Clean any tools used with white spirit. Polytrol is non-flammable, however, any rags, steel wool etc. soaked in Polytrol may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding. Things to Remember

21 reviews for Marine Polytrol

Clean the surface with warm soapy water or Net-Trol, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface. After proper preparation of the surface, Polytrol should be left to work for 10 – 20 minutes. It is important that you do not let the Polytrol dry out and create a film on the surface. Do I have to remove all previous finishes/treatments before applying Polytrol? Polytrol works by saturating deep into the surface of the door, not by leaving a coating, so removal of the excess Polytrol is important. Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake. Ideal Uses for Polytrol Color Restorer

Firstly, prepare the door. Remove any dirt, grease, grime or mildew from it. If there is any wax or polishes on the door, you will also need to remove this. Owatrol Polytrol is best used to restore the colour and appearance of dull and faded surfaces such as Faded Plastic, GRP, Chrome, Aluminium and Stainless Steel, Flat and Chalky paint work, Terracotta Floor Tiles and many other surfaces that have been suffered from UV deprecation, weathering and pollution, on bare and coated surfaces. Polytrol can be used to restore the shine and protect against corrosion. Application When using the Polytrol 250ml spray can, simply spray on liberally, wipe off any excess and leave to dry.Owatrol Polytrol helps to restore the colour and appearance of dull and faded surfaces caused by exposure to sunlight, rain and pollution.

You can use Dilunett to remove the previous orange-brown coating, however, Dilunett is powerful enough to remove up to 8 coats of paint in one application, so any other coats of paint that lay underneath the new paint will also be removed. To use Polytrol you simply rub it into the surface with a clean, dry cloth and leave it to work for 10-20 minutes before wiping off any excess with a lint-free cloth. Job done! Maintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above. Clean Up If Polytrol is being applied to bare metal, use 000 grade wire wool soaked in Polytrol to apply the Polytrol to the surface, allow the Polytrol to work for 10-20 minutes and then remove excess Polytrol with a clean lint free polishing cloth. Allow at least 12 hours for the product to dry. Anoth customer achieved impressive results on their moped with Polytrol. They just wiped it on with a lint-free cloth, left it to work and then wiped off the excess. The Polytrol brings out the pigment from within the surface and leaves it looking good as new!

Owatrol Polytrol is used for revitalising the colour and appearance of tarnished and dulled plastics or fibreglass (GRP) plus many other substrates. Works excellently at re-enhancing the surface. Polytrol eliminates the need for waxes and polishes that sit on the surface and dry out quickly.

The Owatrol Polytrol Colour Restorer is also suitable to be used on tarnished plastics, gelcoats and a range of other surfaces. Applied simply with a cloth or brush, Polytrol dries to a tough and long-lasting flexible finish resulting in there being no flaking or peeling. Clean the surface with warm soapy water and rinse thoroughly or use an appropriate solvent (follow manufacturer’s instructions). Leave the surface to dry for a minimum of 24 hours. Application of Polytrol Colour Restorer General directions The Chancellor Jeremy Hunt has today (Wednesday 22 November) announced a range of tax, benefits and savings measures. We round up the key announcements and what they mean for you. Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint-free cloth. Leave to dry. Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint free cloth. Leave to dry.