Joined in 2023 
82 
63 About this deal
We also connected an Android phone to the ports and recorded how many volts and amps it received. The phone charging test was probably the most realistic as it showed what kind of volts and amps a real device would negotiate with the hub.
Hi there, I'm in need of a USB Type C Splitter, Hub, OTG Adapter ("Power + Data") etc etc for my Quest, I'm hopping to find suggestion's for Splitters that are preferably known to work safely with the Quest although I would truly appreciate any other recommendations as well... https://medium.com/@leung.benson/what-happens-when-you-plug-two-usb-c-host-ports-together-with-a-c-to-c-cable-4f8e912f8a3dSabrent's HB-U3CR looks like it was built for MacBooks, thanks to a gunmetal gray aluminum chassis and a stylish, slanted design that will prop it up at an insertion-friendly angle on any table. However, it's an equally strong choice for use with a PC laptop that has USB-C ports and needs a few USB Type-A connections. In addition to the SSD, the Anker PowerExpand has an HDMI out port and two USB 3.x Type-A ports that operate at 5 Gbps. There’s a USB-C power pass-through you can plug your laptop’s power adapter – up to a 100-watt unit – so that you can charge your computer while using this hub (the USB-C port does not work for data transfer; we tried). You can also get other versions of Inatek's USB hub, the HB2025 for example, that connect to your computer via USB-C, which is a more common interface for 10 Gbps connections, particularly on laptops. We really wish one of these hubs had a mix of USB-C and USB Type-A downstream ports, but they are all Type-A downstream. Even if all you plugged in were phones then after the first phone then all devices would see an out-of-specification USB voltage which they did not negotiate and may refuse to work at all.
Yes, it’s possible to simultaneously use both ends of the USB splitter without any issues, but the transmission speed can decrease compared to when only using one end. How often should I change my USB splitter?
No results found.
Not every USB Hub is one of the best USB hubs you can buy. We tested a number of other models that are worth considering, but not necessarily at the head of the class. If you need a splitter then buy an active hub. I cannot find any that advertise multiple PD outputs (only pass through for a laptop) and this would likely need a lot of expensive power conversion to handle, see the rest of my answer below.
PAY ATTENTION TO THE LIMITATION】The C Splitter does NOT for monitors,Only support ONE audio outputs two usb-c port can not work with 2 headphone at the same time(NOT For Power input ),NOT for monitor display，Do NOT work with HDMI cable, Apple Watch. This is a USB-C female to USB-C male adapter designed forpower output or data transfer and it will NOT support video signal transmission.Support 5V/0.9A power output. At 4.8 volts, which is around the minimum voltage most USB devices will tolerate, we got 1.25 and 1.32 amps from the charging and data ports, respectively. When I plugged my Android phone in to charge, a real-world situation because a device will negotiate the best combination of volts and amps, the charging ports sent 4.78 volts at 1.35 amps while the data ports gave the same amount of volts, but just 0.35 amps. To make a long story short, you'll get 6.4 watts from the charging ports, which is decent but not the 15-watts that fast phone chargers provide. All three charging ports should be able to deliver this at once.
If you're using an external storage device – perhaps an NVMe drive you've put in one of the best SSD enclosures– you’d benefit a great deal from using a hub that supports 10 Gbps connections – alternatively known as USB 3.1 Gen 2 or USB 3.2 Gen 2. Unfortunately, very few USB hubs actually support these higher speeds and even fewer still support the 10 Gbps speed when it comes from a Type-A, rather than a Type-C, port. Both USB-C and Thunderbolt use the same USB-C connection. The difference is that a “generic” USB-C connection typically provides 10Gbps of bandwidth, and Thunderbolt provides 40Gbps, with a road to 120Gbps with 2024’s Thunderbolt 5. Any extra connectivity? Some USB-C hubs will come with HDMI out, allowing you to connect to a monitor, provided that your PC can output video from its Type-C port. Other hubs have microSD or SD card readers built-in. Overall, Anker’s hub is well designed, with adequate spacing between the two 5Gbps USB-A ports. There’s also a 5Gbps USB-C connection for data, plus a second USB-C port for power input at up to 85W rated. (The charger allows up to 100W in, but supplies 85W.) An HDMI port allows for 4K/30Hz video or 1080p/60Hz video to a single external display, standard for the category. Ethernet is excluded, however, so you’ll need to use Wi-Fi instead. Cord length is about 8.5 inches, above the standard 6-inch length. The best case would be that the phone has massively defensive charging circuitry, but I'd be surprised if it could handle 20V for the smaller components used in phones. Most likely it would burn out the charger circuit.
Power Delivery is a negotiated connection. Both devices communicate with each other to establish their maximum voltage and current capabilities and not every device can take the same voltage. At the start of the connection both sides expect 5V, then they exchange information and synchronise up to a preferred voltage and power level.Basically to summarize I need to be able charge the Quest while I've got a data+power device plugged in as well... A USB-C port splitter is one that allows different devices to be connected to your computer. This will allow the user to use multiple devices to perform different tasks. This form of a port lets devices like scanners, speakers, and cameras connect to the computer. We also did power testing on every powered USB hub. To see just how much electricity the ports could deliver, we connected a MakerHawk Electronic Load Tester to the hub and tried to dial up as many amps as we could. As we dial up amps on any device, the voltage drops, so a 5 volt USB port could drop down to 4 volts or less as we increase the load, but USB devices need close to 5 volts – 4.7 or 4.8 volts is usually enough – so we tested how many amps we could get at 4.8 volts and at the, likely unacceptable, rate of 4.05 volts. If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place.
Great Deal 
New Comment