Sony MDR-ZX330BT Bluetooth Wireless Headphones with NFC Connectivity - Black

Product Information

If you experience discomfort after using the BLUETOOTH device, stop using the BLUETOOTH device immediately. Should any problem persist, consult your nearest Sony dealer. In this case, delete the pairing information of the headset from the BLUETOOTH device, and then pair them again. The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the paired device with the oldest connection time is replaced by the new one. When you listen to music from a computer on the headset, sound quality may be poor for the first few seconds after a connection is made. This is caused by the computer transmitting music at sound quality for communications at first, and it is not a malfunction.

Press the Windows Key on the computer and type " add bluetooth device". On the right hand side, select the Settings category.

Compare technical data of the product to its category

NOTE: If the device name is not displayed in the Bluetooth items, there is a possibility that the Bluetooth function is set to off. Set the Bluetooth function to on.

If the headset detects a problem while charging due to following causes, the indicator (red) may turn off, although charging is not complete. In this case, charge again within the charging temperature range. If the problem persists, consult your nearest Sony dealer. If the pairing information was deleted by initializing the headset, etc., delete from your iPhone the pairing information for the headset, and then pair them again.To be able to use the BLUETOOTH function, the BLUETOOTH device to be connected requires the same profile as this unit. Note also that even if the same profile exists, devices may vary in function depending on their specifications. If you are using your Bluetooth speakers or headphones for the first time, they will most likely go into pairing mode automatically when you turn them on.