DeWalt DWE560-GB, 240V 184mm 65mm Compact Circular Saw, Yellow

Product Information

After several weeks of testing the DeWalt DCS391 Circular Saw out against regular construction timber, hard oak and even a bit of super tough Iroko, I’m almost a DeWalt convert. It’s hard to fault the grip, power and handling you get from this cordless saw. It’s a premium product with just a few problems. The DeWalt DCS391 is one of the best lightweight circular saws you can buy. It fills the gap between using a heavy duty table saw and wearing out your arm with a regular panel saw. Incredible balance, comfort and performance are just three things that this saw has got going for itself. US tool brand DeWalt are nearing their 100 th birthday, and in that time, they’ve done a lot for the professional and DIY tool market. Inventing the radial arm saw is just one of their proud achievements, and their range of powerful XR battery powered tools are some of the best on the market.

Nowadays, top brands offer work boots in a whole array of colours and designs to give more options to the buyer, as well as doing a fantastic job at keeping your feet safe while you are working. Cheap / Off brand Power Tools Do not use electric tools in wet conditions unless they are approved for that use. If you must work in wet conditions, always ensure you have good balance and are unlikely to slip.Of all 35 products there were a total of 17 that were more expensive and 16 that were cheaper than DeWalt DWE560-GB 1350W 184mm Electric Circular Saw 240V.

First of all, many well-known brand names tend to boast about their flagship tools in television, trade magazines and online ads. They tend to make the harder jobs look extremely simple when using their specific brand. Of course, the basis of this is to help sell their product. So is this a realistic representation of what the tool can do for you, especially if you’re just starting out? The answer is no. Different skill levels and experience has a significant factor in the effectiveness of a tool, as well as other things. DeWalt are well known for their saws. And I’ll say it right now, the DeWalt DCS391 Circular Saw is one of the best battery powered circular saws I’ve ever laid hands on. It’s just so easy to use and a joy to handle. It makes crosscuts through soft and hard woods without complaining, and even beats the excellent Makita DHS680Z when it comes to rip cuts. Having tools with excellent durability is extremely important. Not only will it mean you will not have to spend out on replacement tools when they break prematurely, but because tougher tools will do a better job. Sometimes cheaper ones can appear to work great until wear and damage suddenly make them unusable, and you are left unable to complete your task. This will lead to an extended work period as you will have to go out and buy a replacement. If you use that tool as part of your profession, it could mean the difference between hitting your deadline or not. No matter what kind of job you have or how you’re using the equipment, make sure your tools can stand up to the task in the first place. Wear clothing that fits well. Loose clothing or accessories can get caught in a tool’s moving parts, which could result in dire consequences. Cheap drill bits do not cut well when they are brand new and don’t cut cleanly either. It will make the job slower and more difficult. It can be challenging to identify if a cheap drill bit is doing a good job because they can work great on lighter materials. Once you go to use it on the heavier stuff, however, you will run into an array of issues that will frustrate you. PPE (Personal Protective Equipment)Cheaper brands, such as those you would find in high street bargain stores, will have been mass-produced with lower grade materials which allow the low price tag. Though that may sound good for your bank account, you will soon discover you have a tape measure that slices your fingers, screwdrivers that don’t fit in the cross slot of a screw and a hammer grip that is slipping from the handle. When working at heights, never leave tools lying out in the areas where they could present a hazard to the people below. At least some of this excellent performance must come down to the 165 mm DT1209 blade. There are 24 TCT teeth that make short work of both soft and hard woods. The finish isn’t the best of all the circular saws I tested out, but it was probably the most effortless to push through the cut.

Finding a trustworthy brand can be a big undertaking, and when you are faced with lots of recommended companies, the search can feel daunting. Some manufactures cater to different areas of the workforce, and not all brands offer all the tools in every field. First, you need to ask yourself if the brand you have chosen can provide you with the tools you need now, and the ones you will need in the future. Of course, you could buy from multiple brands, but that will require more research that takes up valuable time. The rip cuts I made into some softwood board were surprisingly easy. I didn’t expect this performance from a lightweight battery operated saw. The guide rail is marked with measurements and feels solid enough when clamped down as well. It leaves a nice thin kerf and was easy to push through the timber. When you are finished using a compression tool like a nail gun, make sure that the pressure is released before you break the hose connections. The next challenge was on much harder wood. Some English oak timbers I milled up several years ago had dried nicely and proved ideal for pushing this cordless saw a bit harder. I tried out the same test: cuts at 0° free hand and with a roofing square, then set to 45° to force the saw to work a lot harder. Screwfix has an excellent reputation and is arguably the best brand for trade tools in the UK. This is down to them supplying only top-quality tools at extremely reasonable prices. It’s obvious that the team at Screwfix are passionate about what they do – having friendly and helpful staff that range from online assistants to instore staff. If you are unsure or need any advice on your DIY or trade job, they are more than happy to answer your questions.When in control of a hand or power tool, it is your responsibility to do everything in your power to keep you and the environment safe. That means wearing visors, gloves, goggles with anti-fogging coatings, vented respirators, face masks made of premium cushion materials and ear muffs with soft ear cups. But what I really don’t like that when you loosen off the fastener, it drops all the way to 50° rather than 45°. It’s good that you can get up to 50°, but you’re much more likely to need a 45° bevel. You need to stop and line it up each time, there isn’t a detent that helps you catch the common bevel angles you might need like 22.5°either. The problems with the dust extractor placement don’t stop there unfortunately. When plugged into a dust extractor hose, there’s barely enough room left for your hand on the handle! I’m surprised at this design decision as it’s not very user friendly or well thought out. And if you’re a left handed user, it’s virtually impossible. I’ve got a love/hate relationship going with the bevel adjustment on this saw. I’m a huge fan of the fact that it marks out each degree from 0 – 50°. That’s brilliant for when you need to make an odd bevel cut. It’s

Seeing as this is a blade designed to cut through timber only, I didn’t try it out on any other material. You could probably use it to cut plastics or even soft metals, but it wouldn’t be a fair test of a wood cutting blade. Power tools can sell for a decent price, which has opened up the doors to cheap and fake tools coming onto the market to maximise profit. The issues we have with such tools are that they may not provide the power needed to complete the job given. Also, many of them are made with flimsy materials that could fall apart easily with the vibrations of usage. The best-case scenario is that the tool will stop working, but in the worst case, they can explode, burst into flame or shatter over the user.There is a long list of brands that excel in specific tools, but don’t do so well with others. One company that is fantastic across the board is Screwfix. The blade that comes with this saw is the DT1209. It’s designed to work specifically with the DCS391 and is optimised for cross cutting. But rip cuts (where you cut along the grain of the wood) are a big part of any challenge, so I also set the saw up to cut along the length of constructional timber using a fence. If DeWalt were to fix this dust port issue and upgrade the motor to a brushless one, I’d probably rate it higher than the brilliant Makita DHS680Z. It cuts through timber so easily and confidently, that if you already own DeWalt batteries, this is a no-brainer to get hold of.