Aico EI1529RC Hardwired Smoke Alarm Remote Test, Hush & Locate Switch , White

Product Information

The Ei1529RC is a wall mounted Remote Control device powered by 230V AC. It is recommended for use in systems comprising of three or more hardwired interconnected mains Alarms. The remote control is recommended for use in systems comprising of three or more interconnected smoke/heat alarms.The wall mounted switch unit locates, tests alarms or silences false alarms (only on 'R' models in the system) from an easily accessible low level switch position. The triggered alarm can be audibly identified - and silences all others - automatically resetting after 10 minutes Locate Switch: If the Alarms are sounding, pressing the Locate Switch silences all but the originating Alarm, thus allowing easy identification of the source of the alarm.

The EI1529RC from Aico is a mains, 230V, powered remote control switch for use with their 2100 and 160RC series of smoke and heat alarms and with the 260 series of carbon monoxide alarms. The Ei1529RC is a remote control switch that runs on 230V AC mains power. It is designed for use with 2100, 160RC and 140RC series smoke and heat alarms, and 260RC series carbon monoxide alarms. Test Switch: Allows the user to test all the interconnected Alarms at once from a convenient point rather than having to press the test button on each Alarm.Wall mounted for ease of use – can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied) Test the alarm: All alarms on the system will sound. This is the equivalent of pressing the test button on each individual alarm

If a product fails after six months of receiving the item it is considered a warranty claim and is the responsibility of the buyer to pay for the return postage. We will then dispatch a free-of-charge replacement once the original has been received and tested. Book a DPD Return Here Mains powered Ei Electronics smoke and heat alarms require a 230V AC power supply and up to 12 alarms can be hardwire interlinked in one system. All alarms on the system will sound. This is the equivalent of pressing the test button on each individual alarm Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive) Easily installed via a 3 wire connection of live, Neutral and Interconnect/Control (as standard smoke/heat alarm wiring).Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives The wall mounted switch unit can locate the initial source of an alarm, silence any false alarms and test all the alarms in the system. The control unit is mains powered and interlinks via hardwire connection with the majority of Ei Electronics and Aico products, including carbon monoxide alarms. These switches are highly recommended for systems with a mixture of smoke, heat, and carbon monoxide alarms so that occupants can identify the source of the alarm and take the appropriate action depending on the type of emergency.

Compatible with 3000, Ei2110e Multi-Sensor Fire Alarm, 160e Series alarms, 140RC Series alarms and hard wired interconnected Carbon Monoxide alarms The Ei1529RC is used to control all the alarms in a system from one place. We highly recommend fitting a control switch if you have smoke, heat and carbon monoxide alarms on the same system as it’s essential that you can tell which alarm has sounded. From then you can identify which danger is present and the action you should take. I have used Fastlec three times each time I have found them to be efficient fast and happy to give you information on their products."

1. No Longer Required/Ordered Incorrectly

The unit is suitable for wall mounting using the surface mount box supplied or a standard recessed box, not supplied, may be used. It increases the flexibility and user friendliness of the alarms by allows the user to remotely ‘Locate, Hugh and Test’ the alarms in the system: Remote test and hush switch specifically designed for use with the Ei161RC, Ei164RC or Ei166RC, and with the Ei2110 series. Aico EI1529RC Mains Powered Remote Control Switch - functions

Up to 4 x EI1529RC switches may be installed together with a maximum of 20 x 2100, 160RC and 260 Series smoke, heat or carbon monoxide alarms Our goal is to provide one stop place for electricians and electrical contractors, but we are happy to help other clients too. Please let us know should you like to discuss anything and we’ll get you in touch with an electrician who can provide a professional advice! Locate, identify a triggered alarm: The triggered alarm can be audibly identified - and silences all others - automatically resetting after 10 minutes

Silence Switch: Allows the user to silence all interconnected Alarms at once for 10 minutes in case of false alarm. Wall mounted for ease of use can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied). If you have a fire alarm system comprised of three or more interconnected smoke/heat alarms, it can be useful to keep a remote test and hush switch to hand. The Aico Ei1529RC is designed specifically for use with the Aico Ei160 series of smoke and heat alarms: the Ei161RC ionisation detector, Ei164RC heat detector and the Ei166RC optical detector. Test Pressing the Test switch into the on position will test all the alarms in the system. This operation is equivalent to pressing the Test button on all alarms in the system simultaneously and as such performs a true functional test of the system without having to reach up to each alarm in turn. Pressing the Test switch overrides the Location function and resets the system to standby.