SUPERWHOLE 12mm Equal Straight Compression Coupler Pipe Fitting Double Ferrule NEW

Product Information

Swagelok-certified trainers are available to teach courses on topics such as Tube Fitting Installation and Tube Fitting Inspection at locations and times convenient to you. Fittings are also compatible with connecting low carbon steel, stainless steel and many types of plastic pipe including crossed linked polyethylene (PE-X) and polybutylene (PB) with size compatible outside diameters. Straight Couplers , Reducing Couplers , Male Couplers , Female Couplers , Elbows 90 deg , Wallplate Elbows , Long Radius Elbows , Angled Wallplate Adaptors ,Stop Ends, Straight Tap Connectors , Bent Tap Connectors , Tees , Reduced Branch Tee , Both Ends Reduced Tee , Reduced End Tee , Reduced End and Branch Tee , Straight Cylinder Union , Bent Cylinder Union The existence of pre-bent tubes and rising popularity distro plates, building with hard tubes have never been easier. As a matter of fact, a lot of the newcomers to custom loop liquid cooling have built their first loop using distro plates and hard tubing. We are more than happy to give you a hot tip that EK is working on bringing pre-bent tubes to the product portfolio. We also promise that we will cover distro plates in more detail with one of our upcoming blog posts. What is G1/4″?

Fittings are manufactured from high-quality brass materials which ensure a permanently tight and secure connection, without the use of special tooling or additional sealant. These fittings are suitable for connecting a wide range of tubes, including copper tubes in accordance with EN 1057, carbon steel to EN 10305, stainless steel to EN 10312 and plastic pipes to BS 7291, EN 15875 and EN 15876. Compression fittings are especially advantageous in retrofit plumbing schemes, where the use of heat must be avoided. They are available in 8mm – 54mm and are suitable for connecting tubes in accordance with EN 1057 and many other standards. Some manufacturers use more than one o-ring in the base of the fitting or use a single special-shaped o-ring to grip the tubing, but in the end, they all serve the same purpose. To compress an o-ring which prevents the tube from popping out of the base of the fitting. Hard Tubing Push-In Fittings All-In-One Affordable, easy to install, maintenance-free liquid cooler with class-leading performance Regarding the fittings, there is one more detail you need to know. Almost all of the fittings nowadays use the G1/4“ thread (12.9mm wide) and this is the industry standard for all mainstream custom loop liquid cooling manufacturers. In case you are tumbling through server solutions or some older water cooling gear, you might stumble upon G1/8“ (9mm wide) or G3/8“ (16.5mm wide) threads. But like we said, the G1/4“ is the norm and the other sizes have become very rare. So the G1/4″ label is just the thread size label, which makes sure that your liquid cooling products are compatible with each other.

While in the early days we had simple barb fittings, nowadays the market has narrowed down to only compression type fittings. While barb fittings are still available for workstation purposes and applications where the aesthetics are not a key point, the market is dominated by compression type fittings. The compression fittings themselves are divide into two major categories which are, Soft Tubing Compression and Hard Tubing Compression fittings, or for short STC and HDC. Soft Tubing Compression Fittings There is no significant difference. Compression fittings designed for liquid will work fine with gas but if you use optional PTFE tape, make sure it is gas grade. In addition, ensure the fittings are accessible and not hidden behind walls or under floors. Are Compression Fittings Reliable?

Soft tubing is often made out of neoprene, rubber, silicone, PVC, or other special compounds that are specifically made to be compatible with PC liquid cooling. You can choose see-through – clear tubing, colored – non-transparent tubing, and UV reactive tubing. You cannot choose any tubing from the local market for water cooling. Well, ideally, you can, but no one can guarantee if some manufacturing residues will impact the coolant stability, or you will spring a leak because of size tolerance issues.

These fittings are advantageous if you’re familiar with using compression fittings. Because they’re typically used in low-pressure systems and tend not to require a user to do any soldering/welding, they’re suitable for domestic use. At Plumb Parts our range of compression fittings are suitable for a broad spectrum of applications across the domestic, industrial and commercial sectors.