Windscreen Wiper Linkage Push Rod Arms Repair

Product Information

Stop the rust:Each air intakegrille on the underside of the moulding is supported by a steel frame, so it’s worth applying a liquid grease to stop them rusting away.

Typical Lead Time: 24 - 48 hours depending on part availability What does a windscreen wiper linkage do?No you shouldn’t drive with a bad wiper linkage. Driving with faulty wipers isn't just potentially dangerous, it's also illegal and could result in a hefty fine if you’re pulled over. Field repair:The motor plate has, in the past, broken away from the mechanism and been subsequently secured with three self-tapping screws. This is probably when the main damage happened. It’s a ‘get you home’ repair.

The windshield wiper linkage is designed to last the lifetime of the vehicle, but like any other mechanical part it can break or malfunction when you least expect it. As soon as you begin to notice your wipers struggling to move across the windscreen, making strange noises or moving out of sync, you should have your wiper system, including the linkage, looked at by a mechanic and replaced. The wiper linkage is what attaches the windscreen wiper motor to the wiper arms and blades. How does the windscreen wiper linkage work and what are the components? Final job:On the outside of each hinge cover are two rubber tongues that need to be carefully pressed downward to locate underneath the edge of the wing panel. Changing a wiper linkage is a routine repair for all mechanics and can be done both kerbside as well as in the workshop, providing it is safe to do so. Crank nut:To ensure the crank nut is tight on the motor shaft, the crank is held firm with one spanner while tightening the 13mm AF nut with another.

Problems with a multifunction switch

Rubber pegs:The hinge covers are fixed to the intake moulding by rubber pegs through these holes. The pegs can be sliced off from the underside using a craft knife. Initial assessment pointed to a serious engine cooling problem, but that was easily fixed. Then there have been leaking fuel pipes, a leaky injector seal, inoperative handbrake, new camshaft and fuel pump drive belts, new differential mountings and a professional interior clean to add to the bill. But we’re still comfortably within budget, including the parts for these jobs...

Poor visibility out of your windscreen can greatly reduce your reaction time and cause you to miss important signs and dangerous hazards on the road. A wiper system that doesn't clear the screen properly and affects the drivers' visibility is dangerous and will also result in an instant MOT fail. Does a wiper linkage deteriorate with age? Mitsubishi recalled the 2007-2013 Outlander for wiper motor failures (recall SR-17-003). Another Mitsubishi recall (SR-16-010) covers a wiper motor in the 2011−2015 Outlander Sport / RVR. Botched:When buying this car, I’d noticed this overlong stud poking out of the scuttle, but was too busy assessing the rest of the car to investigate then. Best way:Because of its width, it’s a struggle to withdraw the moulding into the engine bay – easier to push it up the screen and withdraw it from the side. Orientation:When refitting motor and connecting the linkage to the crank arm, the linkage is arranged this way to ensure the wiper arms set off in the correct direction.

\n\t\t\tHalfords Windscreen Wiper Repair Clip (FIXG261)

New wiper linkage assembly (transmission). The wiper arm shaft seizes up inside the linkage. The wiper linkage, also known as wiper transmission or wiper link assembly, has two shafts that hold the wiper arms. Often, one of the shafts seizes up, it's a common problem in many cars.