Briwax 400g Wax Polish - Dark Oak

Product Information

wax and buff the wax in the same direction as the grain of wood just as you would with paint. Some circular motions when buffing are fine too.

wax will make your furniture piece a bit darker in color but will leave a smooth buttery finish. If you don’t want this look, then don’t wax but it will be prone to scuffs and chips.Annie Sloan’s dark wax is a very good product, but its consistency is a little hard compared to some other brands. When using A.S. dark wax, I usually pre-mix it with a soft clear wax to make it more workable. One of the simplest and most beautiful ways to give an antique look to a piece of painted furniture is by applying dark wax. work in sections at a time when waxing. Make sure to buff that section first before moving on to another section (example: wax the top of the desk first then buff before moving on to the legs). Transparent colour (one coat): with Osmo Flat Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply very thinly to the clean and dry wood surface along the wood grain and spread well. Ventilate well while drying and avoid covering the surface. After 2-3 weeks, the floor surface is fully cured.

As a colouring primer for flooring: Leave to dry for approx. 24 hrs to allow pigmentation to cure before applying second coat with Osmo Polyx®-Oil. Other household cleaning products such as vanish, bleach, baking soda etc. are likely to cause severe discolouration or staining. the longer the wax stays on, the harder the wax gets. If I’m selling a piece of furniture, I make sure to not move it/transport it for a good week so the wax has time to really set and harden You can use a cheap brush or a wax brush to apply the wax. Make sure you remove loose bristles before using it.If you think you went too heavy in a certain area, don’t panic. Just apply a little clear wax over the dark wax and wipe it with a clean rag. The clear wax will remove the most of the dark wax so you can start that spot over. Multi-purpose cleaners such as washing up liquids and detergents are highly detrimental to the finished surface and is not recommended to be used as discolouration or staining may be possible.