Time-Sert M10x1.5 thread repair kit #1015 by TIME-SERT

Product Information

The insert is provided with a built-in flange that automatically positions its depth during installation. This simplifies installation and produces a strong, permanent repair by allowing the full torque of the fastener to be applied to the repaired threads. The reason for this is simply the weakest link effect. If you only repair the bad hole or holes and leave the others there is a very good chance the other non-repaired holes may fail. If multiple inserts need to be installed this can also be done using a CNC with a tapmatic reversing head. Once the insert is seated, reverse rotation of the tap handle to remove the installation tool driver from the installed Time-Sert.

If TIME-SERT or any variation is used in your main URL this is a violation of our registered trademark and we will terminate the relatonship.What is happening is the plating is slightly heaver on some inserts that is why it will feel tighter when screwing inserts on driver tool by hand. No, you cannot repair a helicoil with a TIME-SERT because the are too close in size. We can offer a larger diameter insert called BIG-SERT Link: BIG-SERT Was the insert actually installed correctly using Time-Sert tools and square to the hole? This would have a huge effect on the outcome of the torque specification. Along with what type of material being inserted, plastics will not have the same torque values as aluminum's, steels, or cast irons. Another thing to keep in mind is the length of the insert. Inserts must match the length of the bolt threading into the hole. Too short of an insert length could result in thread failure. TIME-SERT ® inserts have no prongs or tangs to break off or deal with down in the hole, which can be a expressly retains the right to make changes or discontinue any product it manufactures or sells at any time and without notice.

that you "do not" want to bottom out the driver tool on installation. There is a simple method to safeguard against bottoming the tool out, by placing a visual mark the driver tool. Customers have found in their own testing data that TIME-SERT’s have exceeded their expectations. Many of our larger customers will test TIME-SERT’s before placing them in critical applications and find excellent results.The video example shows the speed in which TIME-SERT inserts can be installed in a blind hole applications using a pneumatic push pull tapper. To our knowledge there is no insert on the market that can be installed faster in a hand volume application where a specific depth is required. The insert in the video is a M10x1.5x14mm. Loctite our p/n 6020 has been tested to 500 degrees without any problems and will give added strength as it will not burn away when engine temperatures above 200 degrees are reached. picture p/n 6020 10ml bottle.